(Merged) I have another problem or concern. Show Less. Share this conversation. 2007 Mitsubishi Galant TCL Off light and service engine soon light TCL is controlled by ABS system,could have an abs sensor going bad. I continue to have the same problem, and now it turns and car on and off, even when I am driving. Try replacing the fuse for the backup lights. You can't post conmments that contain an email address. You can't post conmments that contain an email address. (Merged) Here is a video to help you see which wheels ensor is out.Tuesday, October 30th, 2018 AT 2:18 PM 2 concern for you when check engine light comes on your TCL (traction control) is disabled,so you get the light,and if TCL is disabled so is the ABS (anti lock brakes) you first step is get the Check engine light code,If it was just a TCL light on the ABS code will need to be gathered,You need a scan tool While Driving The Head Lights, Dash Lights, Gauges Radio Go Dim. Tuesday, October 30th, 2018 AT 2:18 PM Check what I sent to you see of solenoid gets power too I will not be here next few days repost question Google eclipse tcl and you will find your answer.

Hello, I have Mitsubishi Galant 6A13 year 2003. Ask Your Own Mitsubishi Question. Tuesday, October 30th, 2018 AT 2:18 PM So you do not think that I should install the Noise Filter first.

You can't post conmments that contain an email address. Tuesday, October 30th, 2018 AT 2:18 PM Since it's been cold I have noticed that the light will not come on immediately as it normally does but will come on after driving it for a while or after it has been driven and then restarted.I need help diagnosing and repairing it. This is the traction control system which is now off. the clamp that holds the intake pipe to the throttle body was in the way of the tcl on the throttle body throwing a code because it couldnt do a sweep test at key on.

Also in Future post this question not as a reply thanks. There is alot of things that could cause a misfire,mass air flow sensor could be dirty or need replaced.Best bet is to take to someone with computer that can read what all sensors are doing in vehicle. I had a right front ABS wheel speed sensor out (Merged) Don't know why it blows, or why the backup lights also are used for the same circuit, but that should fix your problem. (Merged) (Merged) Thanks Hello HMCAC 300. So, yesterday I scan the car for possible problems again. some noise in accelerating but normal in idle of my mitsubishi 4m40please help me so one wheel may be spinning faster than the oter and traction control will be turning onTell us some more! You can't post conmments that contain an email address. I check the coolant tank, and it is normal. Tuesday, October 30th, 2018 AT 2:18 PM And I forgot to mention that the engine light has not turn on, just the TCL light.

Tuesday, October 30th, 2018 AT 2:18 PM Sounds like it is a common problem with the MAP sensor when people put on aftermarket air intakes. Do you think it can be the ABS's sensors. Google eclipse tcl and you will find your answer. You can't post conmments that contain an email address. ı HAVE A SAME PROBLEM , I CANT TEST ENGİNE. While driving the TCL off light came on. Thank you HMAC 300. In the future POST your questions not as a reply. Alternator Light And Abs Lights Come On. Tuesday, October 30th, 2018 AT 2:18 PM Tuesday, October 30th, 2018 AT 2:18 PM Again thank you Sir Several months ago I contacted you about the TCL lights coming on and off. the clamp that holds the intake pipe to the throttle body was in the way of the tcl on the throttle body throwing a code because it couldnt do a sweep test at key on. 1,372 here is the number to mitsubishi i would recommend you call them to b sure. That I should check your recommendation first. New Battery. Most small shops will plug in and tell what is wrong without a charge. Sounds like it is a common problem with the MAP sensor when people put on aftermarket air intakes. Sir, I am so confused, I had spend a lot of money, different mechanic had tell me different things.

(Merged)